Be the first to find out about all the new stuff going on at PhantomFears.com including any new additions and special prices!
Just Sign Up below:

Name:

E-mail:

QUAD Train Horn Kit

Be LOUD and LEAD The Pack!

Check It Out!

There are a number of BIG differences in this horn you should think about:

• Chrome Everywhere ! We chromed not just the outer trumpets, but also the caps and the air manifold. Why? Two reasons. One it looks good. Two, it lets people tell the difference between "our horn" and the "the clones." Our horn is one of the few that has a chromed manifold. "The clones" save a few pennies by using black paint.
• Compact Design ! We have to keep "the length" to make the low notes. We narrowed the trumpet flares and shrank the manifold width to the greatest extent possible. So the height & width of the Hammer 3 is a tight 6" wide x 7" tall, about the same as a dollar bill. The horn bundle, including manifold, is 15" long. Our horns will fit under the hood or on the frame of almost any vehicle. A mounting bracket is included.
• Roof Horns ! Since our horns are nice enough to mount on the roof, we'll mention that our compact design cuts wind resistance, decreases wind noise, and doesn't look like it came out of a cartoon. With a rack of 16" wide, 16" tall, and 25" long horns people might mistake you for a horn nerd.

Bottom line: You can actually install this horn on almost any vehicle! You can install it on the roof, under the hood, or underneath on the frame. If you off road it will fit within the protection of your Safari or Gobi rack. The character and sound quality are excellent by design. When you hit the horn button the sound will echo off the hills.

Click here for sound clip of this horn in action!

Installation:

NO DEAD CAR BATTERIES WITH OUR SYSTEM!! ---You get a full automotive wiring harness, including a relay, with this system. The harness is made from heavy wire and includes a relay. The relay prevents the air system from running when your car or truck is turned off (to avoid killing your battery.)

The coil of red wire is for power to the pump, and the blue wire is for connecting the relay and the horn's air valve. A fuse and fuse holder are included. The black wire on the pump is used to ground the compressor to your frame.

Most people will need a couple of electrical connectors from the local auto parts store, some thread tape or compound, and some zip ties. This kit is otherwise pretty complete: air source, hose, tank & wiring are all included. With the wiring harness and air hose we include this system installs FAST!

Experienced installers will need about an hour. Novice installers will need 1-3 hours.